And thank you too Toby. I’ll take in your suggested YT videos as well. Thanks guys.
@TheMadman_tobyjenner
The level video is a cogent argument for me to source a new AI. You may recall my issues with my Behringher UM2. To start with Reaper I’d settled on recording both guitar and vocal with a mic. With the UM2 I can’t reach -18dB. It maxes out a little below. Time to look at a Focusrite Scarlett?
Not necessarily the Scarlett, John, as there are other suitable products but does sound like time for a replacement. That said Scarlett does have a good reputation and many here use them (as do I)
2 Likes
@TheMadman_tobyjenner
Wrt the top down mixing video I can’t see myself engaging in that level of complexity with a project. At least not for a considerable length of time.
No problem John, bank it for later.
Most important is the input levels, Get them right, then you can experiment with the recorded tracks as much as you want, EQ Reverb Chorus etc depending of how you want the track sounding or enhanced. There is another simpler Mastering video that really helps makes things snap. I’m off too track that down for you.
But yes a new AI is called for by the sounds of it. Ah I smell GAS !
1 Like
That is very helpful. I hope I can get to grips with the concepts. Not sure how much my ear is up to this stuff.
1 Like
ah some interesting stuff here. Thanks for sharing, as I use Reaper as mu main DAW as well
2 Likes
@TheMadman_tobyjenner @batwoman @DavidP @LievenDV
I’ve replaced my naff UM2 with a Scarlett 2i2 and started a learning project in Reaper, this evening. It’s rough atm but it’s a learning environment. Recorded vocal & guitar tracks together through the 2i2. Added a load of FX, all probably unsuitable but tried to keep them subtle although I don’t think the entire piece is. Ended by trying to set the loudness for YT and think that’s better then I’ve ever managed before. Not happy with guitar or vocals but it’s all practice. It’s an mp4 because I want to add video when I learn how. all suggestions, criticisms etc. welcome. Maybe if it turns out all right in the end I’ll post it on AVOYP. Afraid it doesn’t start until 20s in as I’ve not learned how to trim the tracks yet. Also ends abruptly!
3 Likes
Glad to hear you are making progress, John, sounds like a solid path and sure it will turn out OK in the end.
I tried the video and got the ‘unavailable’ error which usually means that you’ve shared it with access set to ‘private’ rather than ‘unlisted’ (to limit access) or ‘public’.
With my Mod hat on, I am of a mind to move this post out of the general discussion of Kenny G videos. My suggestion would be into your own Learning Log, but haven’t checked if you have one, or a What Are You Learning topic. Would that be OK with you?
1 Like
I’ll check this out.
From my point of view I wanted to show how I was progressing as a result of those discussions and tagged the people who had been in them. I set out to send a pm but didn’t immediately see how to do that and it was late! It’s a real quick and dirty recording and I don’t want to take it out of the context of this thread but if you don’t think it appropriate here I’ll delete it, David.
No need to delete, John. I’m still developing my feel for this as a ‘young’ mod. I just tried the video again and still getting the Unavailable message.
The way to send as a message to somebody would be to click on a person’s avatar, eg Toby’s on the reply with Kenny’s video about fx on the master track. Then you can click on Message
That will create a new message that has the post embedded. Then you can add other recipients to the message and share that way.
1 Like
Out at the zoo with grandchildren, in the pouring rain, but will check when I get home. I have seen on my screen the message you’re getting but at the bottom of the message a link to watch it on YT. Wonder if you get that?
I never paid attention to that, John, my bad. That does work and I’m able to listen in YouTube.
The recording sounds pretty good. And the loudness is spot on for upload and replay in YouTube. Nothing obvious in my listening in terms of over-done fx.
Now you have that working, it will not be a big step to make use of your 2i2 to be the source of audio into OBS for making one-take videos, as well as Zoom meetings.
And I enjoyed your rendition of the song, much better in my ears than maybe you think it is … but, hey nothing unusual in that experience 
1 Like
John
Like David, can’t access it here but could on YT. Good level at -3.4db, that is a great entry point so remember all your settings. 
Thought the mix was good as well for a singer/player set up. FX sounded like a subtle bit of reverb and both tracks which made things cut through quite well. Also the gtr/vox balance worked well for me via my PC soundbar. You’ve certainly got a good starting point, so hope that UM is now in the bin.
2 Likes
By default, I see that my videos have ‘Allow embedding’ turned on. I have no idea where that default is set, it has just always been that way. Here’s a little more about embedding: Embed videos & playlists - YouTube Help But I don’t see how to turn embedding on by default, assuming your video did not have embedding enabled, John…
1 Like
When it’s finished I hope it’ll do for a template to start other projects with. The UM is currently banished to the bottom drawer!
1 Like
I don’t think I’ve experienced this issue before. Other ones, but not this one! 
1 Like
John, have a look see in the YouTube studio and check if that Embedding setting is enabled or not.
1 Like